Chapter 2: Unpacking And Installation; Chapter 2. Unpacking And Installation; Unpacking The Sensor; Shipment Contents - Spectris Particle Measuring Systems IsoAir 310P Operation Manual

Chapter 2
Unpacking and Installation

Unpacking the Sensor

>> To unpack the sensor:
1 Carefully open the shipping container and remove the IsoAir 310P particle sensor
shipment. Inspect each part for damage.
2 If any components are damaged, notify the shipper and Particle Measuring Systems
and repackage the unit in the original packing materials.
3 If the system is undamaged, store the packing materials for future transport needs.
Warranties may not apply if return shipping containers are inadequate.

Shipment Contents

Each IsoAir 310P particle sensor is shipped with the following items:
• IsoAir 310P particle sensor
• 2 ferrites PMS part number EL136
• ISP (Isokinetic Sampling Probe) with cap and chain
• Sample tubing: 3 meters of Bev-a-Line 3/8-inch I.D.
• Zero-count filter

Not Included

The following items are not included. You will need to provide them:
• Ethernet cable
• Computer, loaded with FacilityPro or Facility Net software
• Other external software used with OPC or Modbus or computer
IsoAir 310P Aerosol Particle Sensor Operations Manual Page 2-1