Installing The Drivers And Software - Siemens SIMATIC IPC227G Operating Instructions Manual

6.4

Installing the drivers and software

Information on installation of the operating system is available on the Internet:
• Microsoft® Windows® 10
(https://support.industry.siemens.com/cs/ww/en/view/109749498)
Requirements
• Windows 10 operating system is installed in your IPC.
• You need to connect a mouse, a monitor and a keyboard to your PC.
• You also need the supplied USB stick to your PC.
Drivers and software list
The following drivers and software need to be installed on Windows 10:
Operating system
Windows 10
SIMATIC IPC227G
Operating Instructions, 06/2021, A5E50059933-AA
Pull out the memory module from the socket.
Drivers and software needed
• Step1: Intel® Chipset Device Software
• Step2: Intel® Converged Security Engine
• Step3: Intel® HECI Controller Driver
• Step4: Intel® Gigabit Ethernet Driver
• Step5: Intel® UHD Graphics Driver
• Step6: Intel® Serial I/O Driver
• Step7: Intel® Graphics Command Center
Maintaining and repairing the device
6.4 Installing the drivers and software
53