Siemens SIMATIC IPC227G Operating Instructions Manual page 36

Hide thumbs Also See for SIMATIC IPC227G:

Table of Contents

Commissioning the device and device functions

4.2 Switching the device on/off

Following the initial startup, the operating system preinstalled on the drive is automatically

configured on the device.

NOTICE

Faulty installation

If you change the default values in the BIOS setup or turn off the device during the

installation, the operating system cannot be installed correctly. The operating safety of the

device and the plant is at risk.

Do not switch off the device during the entire installation process. Do not change the

default values in the BIOS setup.

Procedure - Switching on the device

1. Set the On/Off switch to "ON" position.

The "PC ON/WD" LED lights up. The device carries out a self-test. During the self-test, the

following message appears:

Press Esc for Boot Options

2. Wait for the message to disappear.

3. Follow the instructions on the screen.

Set the region and language. If you want your system language to be international, select

English. For information on changing the region and language settings, refer to the

section Installing the drivers and software (Page 53).

Procedure - Switching off the device

To turn off the device, always select the function "Start" > "Shut down".

If the device is not going to be used for a long period of time after shutdown, set the On/Off

switch to "OFF" position.

Additional information

Information on your operating system can be found on the Internet:

• Microsoft® Windows® 10

(https://support.industry.siemens.com/cs/ww/en/view/109749498)

Table of Contents