Siemens SIMATIC IPC227G Operating Instructions Manual page 68

Technical specifications
7.4 Technical data
M.2 Module
Max. permitted totally power loss
for each M.2 B key module
Drive, memory medium
M.2 NVMe/SATA SSD
USB stick
Graphics
Graphics controller
Resolution, graphics memory
Interfaces
Ethernet
COM1/2
USB
DP
Keyboard, mouse
In BIOS Setup, you can configure support for RS232/RS422/RS485 for COM1 and COM2 ports.
1
68
• Slot X100: support NGFF M.2
2230/2242/2260/2280/3030/3042/3052 with Key B/Key B+M
• Slot X101: support NGFF M.2
2230/2242/2260/3030/3042 with Key B/Key B+M
Less than 2.5 W
• Slot X50: support NGFF M.2 2230/2242/2280 with Key
M/Key B+M
• 256GB Eco SSD
External, can be connected via USB port
Intel® Integrated UHD Graphic Controller
• 2 × DP++, support resolution up to 4096 × 2160 pixel at 60Hz
3 × Gigabit Ethernet interface (three RJ45) electrically isolated,
Wake on LAN and Remote Boot are supported:
• X1P1: Marwell 88E1512
• X2P1: Marwell 88E1512
• X3P1: Marwell 88E1512
RS232/RS422/RS485 (optional), max. 115 Kbps, D-sub connector, 9-pin
1
On the interface panel:
• 4 × USB 3.1 (900mA)
On the motherboard:
• 2 × USB 2.0 vertical (500 mA)
You can find additional information in the section "Power demand of the
components (Page 70)".
Connection of a DP monitor
Connection via USB port
Operating Instructions, 06/2021, A5E50059933-AA
SIMATIC IPC227G