Siemens SIMATIC IPC227G Operating Instructions Manual page 54

Maintaining and repairing the device
6.4 Installing the drivers and software
Procedure
1. Connect the supplied USB stick to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the required driver.
6. Follow the below steps and click the icon
Note
For a new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
Step 1: install the chipset driver
1. Click Step1: Intel® Chipset Device Software.
2. Click
3. Click Next to continue.
4. Click Accept to accept the license agreement.
5. Click Install to allow the computer to start the installation.
The installation starts.
6. Click Yes to confirm the user account control question.
7. Click Finish.
The chipset installation is completed.
Step 2: install the Converged Security Engine
1. Click Step2: Intel® Converged Security Engine.
2. Click
3. Click Yes to confirm the user account control question.
4. Click Next to continue.
5. Select the radio button before "I have read and accept the license terms", and
click Install to allow the computer to start the installation.
6. Click Finish.
The installation is completed.
54
to install the chipset driver.
to install the Converged Security Engine.
to install the required driver.
Operating Instructions, 06/2021, A5E50059933-AA
SIMATIC IPC227G