Bypass-Valve (Towing The Vm-301-Pavermax ) - probst VM-301-K-PAVERMAX Operating Instructions Manual

Description and Operation
4.6

Bypass-valve (towing the VM-301-PAVERMAX )

●
It is possible to move the laying machine VM-301-PAVERMAX without engine power (e.g. engine damage). Only open
the bypass-vale (at the hydrostat under the driver´s seat).
●
Open the engine cover - by pulling the handle (Fig. A) and tip the engine cover backwards (Fig. B).
● Release the locking (see arrow ) of the driver seat on the right side (in travelling direction) Fig. C +D , to fold the
driver´s seat  Fig. E
Before fold the driver´s seat upwards, remove the rear window at the left (in direction of traffic) if available.
Open the bypass-screw 2-3 rotations with a suitable flat-wrench  Fig. F
●
Now the laying machine VM-301-PAVERMAX can be moved without engine power (only the wheels will rotate) e.g. on
a trailer.
●
Just use proper planks, be aware of the different track width on front and rear!
Important: Tighten (close) the bypass-screw with the wrench before you restart the engine!!!
Fig. A
Fig. C
5150.0022+5150.0023 (41500820)
Fig. B
Fig. D
V3
23 / 36
Unlock lever to lift
up driver´s seat
GB