Hydraulic-Oil Level; Cooling-Water Level - probst VM-301-K-PAVERMAX Operating Instructions Manual

Description and Operation
4.1.3

Hydraulic-oil level

●
The installation machine VM-301-PAVERMAX has to
stand of even and levelled ground to check the
hydraulic oil.
●
The lifting arm has to be completely lowered down.
●
The oil level must be in the middle of the inspection
windows (6).
4.1.4

Cooling-water level

●
The installation machine VM-301-PAVERMAX has to
be on even levelled ground
●
Open the engine cover as described above
By all means read the safety instructions in the
Kubota engine manual carefully.
Air filter
cap
Hydraulic oil
filter
5150.0022+5150.0023 (41500820)
6
●
Remove cover(7) on the water cooler (Caution
when engine is hot)
●
Cooling water has to cover cooling fins. If not fill
only anti freeze to reach this level.
V3
16 / 36
7
Fuel pump
preliminary
Fuel pump
GB