Table of Contents
Advertisement
[Setup via recorder's main monitor]
Configure the settings relating to monitors [Monitor]
The settings relating to the display of the main monitor or sub-monitor connected to the recorder are config-
ured on the setup menu - the "Advanced setup" - the "Monitor" page.
The settings relating to image switching such as multiscreen display and sequence display of live images are
also configured on this page.
The "Monitor" page has 3 tabs; the [Main monitor] tab, the [Sub monitor] tab and the [Advanced setup] tab. The
settings relating to the display of the web browser can be set on the [Web browser] tab of the "Monitor" page
on the setup menu of the web browser. (☞ Page 186)
Set up the main monitor [Main monitor]
Perform settings relating to the main monitor display such as the display position of the camera title.
■ Camera title
[Display]
Determine whether or not to display the camera title
on the main monitor.
On: Displays the camera title.
Off: Does not display the camera title.
Default: On
[Position]
Select the position to display the camera title on
images.
L-Upper/ L-Lower/ R-Upper/ R-Lower
Default: R-Upper
[Camera title]
Enter a camera title to display for each camera using
the on-screen keyboard (☞ Installation Guide page
8). (Up to 16 characters)
Note:
• When using together with the date and time dis-
play to be set on the camera (☞ Page 18) or
OSD (Display Title, ☞ Page 19), adjust the posi-
tion to be displayed to not to overlap with them.
• The camera title configured on this setting will not
be embedded on recorded images.
■ Live sequence (Wide view)
Set the sequence of the wide view screen on the
main monitor.
The following live sequence (Wide view) screen will be
displayed when the [Setup >] button is clicked.
[Mode]
Select a screen pattern of the sequence.
1-screen live sequence/4-screen live sequence/
9-screen live sequence/16-screen live sequence
Default: 1-screen live sequence
[Keep aspect ratio]
Select whether to change the aspect ratio of the dis-
played area if the aspect ratio of the image is different
from the displayed area.
Checked: Keep aspect ratio (Does not change the
ratio automatically).
Not checked: Does not keep aspect ratio
(Changes the ratio automatically).
Default: Not checked
[Duration]
Set the interval (duration) for switching camera
images.
3 s/ 5 s/ 10 s
Default: 5 s
46
Advertisement
Table of Contents
