Table of Contents
Advertisement
[Setup via recorder's main monitor]
Set the image rotation of camera [Image rotation]
Select the image rotation for each camera and transmit it to the camera to change the camera settings.
Clicking the [Setup >] button for "Image rotation" on the [Camera setup] tab will display the setup window.
[Image rotation]
• 0 °(Off): Does not rotate the image.
• 90 °: Rotates the image by 90 °.
• 180 °(Upside-down): Inverses the image upside-down.
• 270 °: Rotates the image by 270 °.
■ Camera Selection
Select the camera to which the setting of the "Image
rotation" is to be sent. Mark the checkbox of the
camera to which the setup information is to be
transmitted.
[Transmission] button
Transmit the setting of the "Image rotation" to the
camera.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
24
Advertisement
Table of Contents
