Table of Contents
Advertisement
[Operation via recorder's main monitor]
Panning/Tilting
Adjusts the horizontal/vertical position of the camera.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [Control] button.
Click the desired point to be located at the center of
the angular field of view. The camera will move to
locate the clicked point as the center point in the
image display area.
Zooming
Zoom the displayed camera image in/out by zooming the camera lens. Depending on the models of the con-
nected cameras, the available zooming factors may be different. Refer to the operating instructions of the cam-
era for further information.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Click the [–] button or the [+] button.
Alternatively, adjust the zoom by placing the mouse
pointer on the image and turning the mouse wheel.
Click the [x1] button to reset the zoom factor to x1.
Note:
• To enable operations in the displayed camera
image from the recorder, check "Enable camera
control with mouse" on the camera control panel.
Note:
• To enable operations in the displayed camera
image from the recorder, check "Enable camera
control with mouse" on the camera control panel.
• When selecting an area in the image display area
by dragging the mouse, the selected area will be
located at the center of the image display area
and the zoom ratio will be adjusted automatically.
110
Advertisement
Table of Contents
