Table of Contents
Advertisement
Hear audio from the main monitor
The audio will be output when a fisheye camera connected with a network microphone is selected in the main
monitor. Non-directional audio will be output in the default state.
Important:
• The audio of the network microphone cannot be heard on a web browser.
• The audio cannot be heard by selecting a camera number with which a network microphone is registered.
• When the network microphone is used in the multicast transmission, the audio of the live image will not be
output.
The recording indicator of the camera number with which network microphone is registered will not be dis-
played in the operation panel in the control screen and the wide view.
Example) When a network microphone is registered with Camera 2
Set up the sound collecting position
The sound collecting position of the network microphone can be set during the live image display, playback, or
media playback.
Important:
• The sound collecting position can be specified only when fisheye images are displayed. When other than
fisheye images are displayed, the position specified on the image and the sound collecting position will not
be consistent.
• During compensation display of the fisheye image, the audio will be output based on the position specified
with the fisheye image.
Step 1
Switch to 1-screen of the fisheye camera for which
sound collecting position to be set.
During live image display
During playback
During media playback
Note:
• During multiscreen or wide view display, the
sound collecting position cannot be set.
• The [Mic setup] button is enabled only when
images are displayed on 1-screen in the control
screen.
• The audio of the microphone is not output even if
an MP4 file is played back (medium) since the
audio of the microphone cannot be copied in MP4
format.
192
Advertisement
Table of Contents
