Table of Contents
Advertisement
[Operation via recorder's main monitor]
Play recorded images
Display the images recorded on the recorder's hard disk on the main monitor.
Playback operation can be made while recording. Playback of images can be controlled from the operation dis-
play area or the wide view.
Refer to page 128 and following pages for playback operation.
Note:
• Images can be played on 1-screen and 4-screen in the control screen. When the sub-stream recording is
set, the image can be played on 9-screen and 16-screen also (Except cameras which record images as
JPEG).
• Images can be played back on 1-screen to 4-screen in the wide view. When the sub-stream recording is
set, images can be played on up to 16-screen (Except cameras which record images as JPEG).
• The audio of the displayed image is output on 1-screen display and the audio of the selected camera is out-
put on multi-screen display of the control screen.
• The audio of the top-left camera on the screen is output during the wide view.
• No audio will be output when playing back in fast forward/fast reverse.
• The camera image can be changed by clicking the camera number (1 to 32) during playback.
• The Multiscreen select button, digital zoom button, Mute button and OSD button remain effective during
playback. Refer to "Monitor live images" (☞ Page 98) for further information.
• When displaying images recorded at the following setting values of resolution and frame rate on each seg-
ment of a multiscreen, the images will be played back with the selected refresh interval.
【No sub-monitor display nor re-encoding transmission】
Resolution
HD(1280×720)
FHD(1920×1080)
【Sub monitor display or re-encoding transmission enabled】
Resolution
HD(1280×720)
FHD(1920×1080)
QXGA(2048×1536) ~ 9M(2992×2992)
12M(4000×3000)
Image data
HDD
Recorder
Display
3-screen/4-screen
50 ips or higher
Display
3-screen/4-screen
50 ips or higher
25 ips or higher
10 ips or higher (H.264/H.265)
Display not available (MJPEG)
123
Main monitor
Advertisement
Table of Contents
