Table of Contents
Advertisement
[ Viewer software ]
Adjust the volume
When the audio data (filename.n3a) is available, a button to adjust the audio will be displayed.
Adjusts the volume. Clicking the button can switch the volume in three levels.
Toggles Audio playback/Silent.
If the audio is controlled or adjusted by another application, the audio may not be played correctly on the
viewer software. To play the audio correctly, adjust the audio only with the viewer software.
Detect alteration of the image data
It is possible to detect alteration in downloaded data to which a code for alteration detection has been attached.
Confirm whether the played image has been altered or not by the following procedures.
Step 1
Select the data to detect alteration on the list and
click the
button.
→ File advanced window will be displayed.
→
Save still images
Save an image displayed in the image display area as a JPEG file on a PC.
: Saves the image on pause in JPEG file with a new name.
Save image data (copy)
Save selected image data (filename.n3r) in any folder on the PC.
Step 1
Right-click the list and select [File advanced function]
from the displayed menu.
→ File advanced window will be displayed.
→
Step 2
Select the [File output] and click the [Execute] button.
→ The "Save As" window will be displayed.
→
Print the displayed image
Print the image displayed in the image display area.
: Prints the image on pause with the date and time.
Step 2
Select the [Check alteration] and click the [Execute]
button.
→ Starts alteration detection and displays the results
→
once the detection has been completed.
Step 3
Designate the folder name and destination drive and
click the [Save] button.
→ Starts saving the image data and displays results
→
once the saving has been completed.
Note:
• Select [File output (Decryption)] if you save data
after decrypting it.
184
Advertisement
Table of Contents
