Auto Mode/Aux/Wiper - Panasonic WJ-NX200G Operating Instructions Manual

Network disk recorder
Hide thumbs Also See for WJ-NX200G:
Table of Contents

Advertisement

[Operation via PC web browser]

Auto mode/AUX/Wiper

Select and activate the auto mode function/AUX function/wiper function of the camera.
Auto mode function
Step 1
Select "Auto mode" for the operation mode. Click [▼]
button and select an auto mode that you want to
operate.
Auto track: The camera will automatically track an
object moving on the screen.
Auto pan: The camera direction will automatically
move (pan) between the start point and end
point set in advance.
Preset sequence: The camera will move to the
preset positions registered in advance in order
of the preset position number (numerical
order).
Patrol: The camera will trace the manually
recorded panning pattern.
Step 2
Click the [Start] button to start the selected auto
mode function of the camera.
Click the [Stop] button to turn off the auto mode func-
tion.
Note:
• When you use the auto mode, please read the
operating instructions of your camera and set the
auto mode at the camera menu in advance.
AUX function
Step 1
Change the operation mode from "Auto mode" to
"AUX" and select a terminal number of the AUX.
Step 2
Open: The AUX terminal becomes open.
Close: The AUX terminal becomes close.
Wiper function
Wiper/Washer of WV-SUD638 can be operated.
Step 1
Change the operation mode from "Auto mode" to
"Wiper" and select a wiper function from the following.
High: Wipes out continuously. (once per 4 sec-
onds)
Low: Wipes out continuously. (once per 8 sec-
onds)
1 shot: Performs high speed wiping (once per 4
seconds) 5 times.
Washer: Performs the specified washer/wiper
operation.
Refer to the operating instruction of WV-SUD638.
Step 2
When [Start] button is clicked, the selected motion
starts.
When [Stop] button is clicked, the motion ends.
Note:
• The following operation is not available while the
washer is operating.
• [Start] and [Stop] operation of "Wiper"
• Control of panning, tilting zooming and focusing
• [Start] operation of "Auto mode"
• [Call] operation of "Preset Position"
• It requires the washer operation settings for the
camera side. Refer to the operating instruction of
WV-SUD638.
163

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nx200k

Table of Contents