Tips To Configure The Settings - Panasonic WJ-ND200 Operating Instructions Manual

Network disk recorder
Hide thumbs Also See for WJ-ND200:
Table of Contents

Advertisement

Tips to Configure the Settings

When having a problem to configure the settings with this software, check and try the solution described below.
Problem
Need to register the network
settings of the newly detect-
ed camera without chang-
ing.
The cameras with the same
MAC address are displayed
with the
and
icons.
IP address is not displayed
when registered after select-
ing "ON" for the DHCP func-
tion of the camera.
No live image is displayed
even though the camera
icon
is displayed.
24
• Display the network settings of the camera and click the [Set] button
without changing the settings.
The newly detected icon will turn to the edited icon (
tings will be registered in the WJ-ND300 (A).
• The IP addresses of the camera registered in the WJ-ND300 (A) and in
the camera are not the same.
Configure as follows.
q Delete a camera icon
w Click the [Set] button after selecting the camera icon
the icon to the edited icon
e Select the WJ-ND300 (A) icon and click the [Manual Registration]
button.
• It may take time for the camera to obtain the IP address. Wait for a
while and display IP address by executing search.
Registration of the camera (registration of IP address, etc.) in the WJ-
ND300 (A) is necessary after displaying the IP address.
• When the camera is already registered, the model number of the cam-
era or the HTTP port number may be incorrect. When the user authen-
tication of the camera is "ON", it is necessary to register the user
name/password on the "Camera" page of the WJ-ND300 (A). Check
and edit the settings.
Tip
.
.
) and the set-
to turn

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nd300aWj-nd300

Table of Contents