Setup; Basic Operations; Configure The Settings - Panasonic WJ-NX200G Operating Instructions Manual

Network disk recorder
Hide thumbs Also See for WJ-NX200G:
Table of Contents

Advertisement

[ Setup on browser ]

Setup

Basic operations

Step 1
Click the [Setup] tab.
Step 2
Click the button for the desired menu.

Configure the settings

It is possible to configure the settings of the recorder using a web browser.
Refer to page 74 for setup items that can be configured from the web browser and their further information.
Step 3
Click the button for the desired submenu.
Step 4
Configure each setting item. Click the [Set] button
after completing the settings.
→ The settings will be applied. When moving to
another page without clicking the [Set] button, the
configured settings will be canceled.
Important:
• If the settings are applied, other login users will be
forcibly logged out.
• If the settings relating to the user management are
applied, all login users will be forcibly logged out.
• Recording may not be performed for around 4
seconds just after the settings are applied.
185

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nx200k

Table of Contents