Table of Contents
Advertisement
[Operation via recorder's main monitor]
Step 4
Zooming can be adjusted by clicking the [–] button,
the [×1] button or the [+] button.
Focusing can be adjusted by clicking the [Near] but-
ton, the [Reset] button or the [Far] button.
Initial position setup
Tilting degree adjustment, vertical angle adjustment, horizontal adjustment of image clipping position can be
performed. For further information about this function, refer to the operating instructions of the camera in use.
Step 1
When displaying the images on a 4-screen, select the
desired cameras.
Step 2
Display the "Camera control [Advanced]" panel
(☞ Page 108), and click the [Setup] button.
→ The camera setup window (☞ Page 109) will be
→
displayed.
Step 3
Click the [Setup] button.
→ The initial position setup window will be dis-
→
played.
Step 4
Adjust the position using the buttons or by clicking on
the image.
Step 5
Click the [Back] button.
→ The screen will return to the camera setting page.
→
Step 5
Click the [Set] button.
→ The adjusted position will be saved on the cam-
→
era.
Step 6
Click the [Back] button.
→ The screen will return to the camera setting page.
→
117
Advertisement
Table of Contents
