Table of Contents
Advertisement
Hear audio from PC
The copied/downloaded data files can be played using the dedicated viewer software.
When the audio from the network microphone is recorded to the audio data (filename.n3a), audibility around the
specified location can be improved with the mouse operation on the image.
Step 1
To specify a sound collecting position, click the
button. (The
button will be displayed when play-
back is started.)
→ The menu for setting the sound collecting position
→
will be displayed.
Step 2
The sound collecting position can be specified at two
points at maximum. When
the icon will be displayed on the screen. Drag the
icon and drop it at a desired location.
→ The audibility of the place where the icon is
→
dropped will be improved.
Note:
• For the image data with no audio from the net-
work microphone is recorded, the
not be displayed.
• Since the audio of the microphone cannot be copied
in MP4 format, the
even when an MP4 format file is played back.
• When "Aspect" is selected for the display format,
the
button will be displayed.
and/or
is clicked,
button will
button will not be displayed
• The audibility can be adjusted with the "Voice
clear" setting.
OFF: Not adjustable
Low: Low effect
High: High effect
• The audio noise reduction function will always be
enabled if "Noise Reduction" is marked.
• The audio from the network microphone will not
be played with the viewer software copied/down-
loaded from the recorder using the software ver-
sion of V1.10 or before. Use the viewer software
of the recorder with the software of V1.10 or later.
When the fisheye images of the fisheye camera are
displayed in 1-screen PTZ/4-screen PTZ with com-
pensation, the audio from the network microphone
will be output at the sound collecting position previ-
ously specified with the fisheye image. To change the
position, return to the fisheye image display.
194
Advertisement
Table of Contents
