Defining The Vs-1616Dn-Em 2X2 To 16X16 Modular Multi-Format Managed Digital Matrix Switcher - Kramer VS-1616DN-EM User Manual

The VS-1616DN-EM
simple to operate using an intuitive front panel keypad. For details of how to route inputs to
outputs, see Switching Actions
The VS-1616DN-EM
Defining the VS-1616DN-EM 2x2 to 16x16 Modular
Multi-Format Managed Digital Matrix Switcher
This section defines the front and rear panels of the VS-1616DN-EM.
Buttons 15, 16 and 17 function as the TAKE, MENU and LOCK buttons respectively.
# Feature
1
2
3
4
5
Double-function
Selector
6
Buttons Area
7
8
9 BREAKAWAY Button
VS-1616DN-EM – Introduction
is a sophisticated device but has nevertheless been designed to be
on page 19.
is housed in a 19" rack-mountable enclosure.
Figure 1: VS-1616DN-EM Front Panel
Function
ESC
Press to exit the current operation.
EDID
Press to assign EDID channels.
STO
Press to store the current setup in a preset. After pressing
the MENU button, this button lights and is enabled.
ALL
Press to connect an input to all outputs. After pressing the
MENU button, this button lights and is enabled.
OFF
Press to turn off an output. After pressing the MENU
Menu Button
button, this button lights and is enabled.
Functions
RCL
Press to recall a preset. After pressing the MENU button,
this button lights and is enabled.
DELAY
Press to set the delay between confirming an action and
the execution of the action.
ENTER
Press to complete the input-output setup when using a
one-digit number instead of two digits. For example, to
enter input 5, you can press either 05 or 5, ENTER.
Press to enter the options in a setup menu.
Press to exit a Menu (see
Menu
Using the Configuration
on page 23).
Kramer Electronics Ltd.
6