Kramer VS-1616DN-EM User Manual page 153

TREBLE
Functions
TREBLE
Set
TREBLE?
Get
Description
Set the audio treble value
Set
Get Get the audio treble value
Response
~nn@TREBLESPchannel,treble_levelCR LF
Parameters
channel – output number: 1-16 (varies according to installed output cards, see
Numbering on page 12)
treble_level – treble level in Kramer units: 0-15, ++ (increase current value), -- (decrease current
value)
Response Trigger
Notes
A minus sign precedes negative values
K-Config Example
Set the audio treble level of output 8 to 7:
"#TREBLE 8,7",0x0D
Decrease the treble level of output 5 by 1 unit:
"#TREBLE 5,--",0x0D
VOLUME
Functions
VOLUME
Set
VOLUME?
Get
Description
Set simple audio volume
Set
Get Get simple audio volume
Response
~nn@VOLUMESPout_channel,volumeCR LF
Parameters
out_channel – output number: 1-16 (varies according to installed output cards, see
Numbering on page 12)
volume – volume in Kramer units: 0-70, ++ (increase current value), -- (decrease current value)
Response Trigger
Notes
A minus sign precedes negative values
Use the AUD-LVL command to set / get the input audio level or the audio level in the amplifier stage.
K-Config Example
Set the volume of output 8 to 25:
"#VOLUME 8,25",0x0D
Increase the volume of output 5 by 1 unit:
"#VOLUME 5,++",0x0D
VS-1616DN-EM – Protocol 3000
Permission
End User
End User
Syntax
#TREBLESPchannel,treble_levelCR
#TREBLE?SPchannelCR
Permission
End User
End User
Syntax
#VOLUMESPout_channel,volumeCR
#VOLUME?SPout_channelCR
Kramer Electronics Ltd.
Transparency
Public
Public
Port
Transparency
Public
Public
Port
150