Software/Firmware Updates; Minimum System Requirements - Digi ConnectPort X4 IA Quick Start Manual

Hide thumbs Also See for ConnectPort X4 IA:
Table of Contents

Advertisement

Software/Firmware Updates

The software or firmware in the PV
485 port. Make sure you read the update instructions carefully and be sure you are
installing the correct software. As with all updates, there are risks associated with
changing the flash memory.
Updates are loaded using a Windows based program called IAPflash. This program is
supplied with the ".enc" file along with instructions. Windows is required to perform
updates. No other operating systems are currently supported.

Minimum System Requirements

The PV
-100-2 is equipped with an RS-485 serial port.
MET
RS-485/422
Baud rate:
9600 bps
Parity:
None
Data bits:
8
Stop bits:
1
Interface mode: 2-wire half duplex
Software
The PV
-100-2 is designed to work with an RS-485 Sunspec compliant host. A
MET
terminal emulator program is required to change settings.
-100-2 can be updated or changed using the RS-
MET
- 18 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ConnectPort X4 IA and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents