Digi ConnectPort X4 IA Quick Start Manual page 20

Description:
of the data values correspond to the output of the HEADER command. NO DATA
is returned if the unit has not received a transmission from the weather station.
Values:
Syntax:
Sample Response:
22.5,-40.0,-40.0,0, 29.3,!168
Auto Output: AUTO
Description:
equivalent to issuing the NOW command every second. This mode will exit upon
reception of any character. If no data is received from the weather station, the units
will not output.
Values:
Syntax:
Sample Response:
OK
Software Reboot: REBOOT
Description:
information is output.
Values:
Syntax:
Sample Response:
None
Version Information: VERSION
Description:
Values:
Syntax:
Sample Response:
Returns the current values in a comma-delimited format. The order
None
NOW
Automatically outputs current data every second. This is
None
AUTO
Forces a soft reboot of the interface. On boot up the version
None
REBOOT
Returns firmware version information.
None
VERSION
- 14 -