18.7.3
Interface error messages
ERR_2
ERR_3
ERR_5
ERR_6
ERR_8
ERR_30
ERR_31
ERR_33
ERR_34
18.7.4
Driver software for LABVIEW®
With the aid of the program development tool LABVIEW
(http://sine.ni.com/apps/we/nioc.vp?cid=1381&lang=US) an easy-to-use individual control or automation software
program can be produced for operating ECO devices. In order to be able to address from the program the
RS 232/485 interface that is used LAUDA makes the drivers specially produced for LABVIEW
charge for download at http://www.lauda.de.
126 / 137
Error
Incorrect entry (e.g. buffer overflow)
Wrong command.
Syntax error in the value.
Impermissible value.
Module or value not present.
Programmer, all segments occupied.
No set-point input possible.
External probe missing.
Analog value not present.
®
from National Instruments
ECO Gold
Meaning
®
available free of
10/2019 i