By pressing
-
17.2.1
Setting the correcting quantity limit
By pressing
-
10/2019 i
Access to the main menu level is obtained by pressing the enter key
-
Selection and confirmation of
-
Control parameter
The adjacent menu window appears. Apart from the control parameters the
currently set values are displayed.
Under the menu point "Tv manual/auto" you can select between man-
-
ual and automatic entry using
The selection "automatic" is displayed in the menu line by (auto). If "auto-
matic" is selected, the entry is blocked for the parameters Tv and Td.
Select and confirm parameters with
-
The respective edit window appears with Min and Max figures for the pa-
rameter values Kpe, Tne, Tve, Tde and Xpf.
Change the value with
-
Single figures can be selected by pressing
-
Confirm your choice with the enter key
-
(ESC) you are returned to the menu level without any change.
-
-
The adjacent menu window appears.
-
The adjacent menu window appears. The minimum and maximum possible
values and the current value are displayed.
-
-
-
(ESC) you are returned to the menu level without any change.
.
extern
or
Access to the main menu level is obtained by pressing the enter key
.
Selection and confirmation of
Select and confirm
Correction limit.
Change the value with
Single figures can be selected by pressing
Confirm your choice with the enter key
ECO Gold
Setup
Control
Pt100.
.
or
and
.
.
or
.
.
Setup
Control.
with
or
and
or
.
or
.
.
.
109 / 137