Section 11: Addressable Manual Pull Station; Description; Installation; 1: Setting An Slc Address - Honeywell Fire-Lite Alarms MS-9200 Wiring Manual

11.1 Description

The BG-12LX is an addressable manual pull station with a key-lock reset feature.
NOTE: For more information refer to the Installation Instructions provided with this device.

11.2 Installation

11.2.1 Setting an SLC address
Each unit is factory preset with an address of "00." To set an SLC address refer to "Setting an SLC address for a Single Point Module"
on page 33.
11.2.2 Wiring a Manual Pull Station
Figure 11.1 shows typical wiring for a BG-12LX Manual Pull Station to an SLC:
62

Section 11: Addressable Manual Pull Station

+
SLC
–
Figure 11.1 Wiring of a BG-12LX Pull Station to an SLC
–
To next device
on SLC
+
FireLite SLC Wiring Manual — P/N 51309:R3 7/29/2019