Bioness BITS Clinicians Manual page 62

Memory
Mode
The Memory Parameter determines whether the Stimulus Pattern will persist or
flash for a period of time. When it is inactive, the target stimuli sequence will remain
on the display screen. To activate the Memory Parameter press the white box.
The box will turn blue with a checkmark and the Flash Time Parameter will appear.
The Mode Parameter controls the level of activity that the client will experience
while performing the therapy program. The Mode Parameter options are Interactive,
Guided, and Independent. To change the setting, press the Mode Parameter Icon.
A pop up window will open displaying the options. Press the radio button
to the desired option to enable it. Press the Done Button to close the window.
Interactive
Interactive Mode is the most active option, and it is the default setting for the Mode
Parameter. Interactive Mode allows the client to select a the target that they are
following to provide visual and auditory feedback. To turn the user Interactive
Parameter off press the blue check mark box. The box will turn white and the
check mark will disappear.
Guided
Guided Mode presents one circular target stimulus among all of the other square
stimuli. The client should be instructed to follow the circular stimulus as it moves
into the neglected hemispace.
Independent
Independent Mode is the most passive option. The client should be instructed to
choose one stimulus and simply follow it with their eyes as it moves from one side
of the screen to the other.
Movement
The Movement Parameter controls the direction the stimuli move during the
therapy session. The Movement Parameter options are Left to Right and Right
to Left. For Chart Motion Program, the Movement Parameter controls how the
chart will move on the display screen. Options include: Up/Down, Left/Right, and
Rotations. To change the setting, press the Movement Parameter Icon. A pop up
window will open displaying the options. Press the radio button
desired option to enable it. Press the Done Button to close the window.
next to the
Chapter 7 - BITS Parameters
next
51