Switching Between Sensors; Disconnecting The Sensor - Bioness BITS Clinicians Manual

Switching between Sensors

1. Select the Bluetooth Icon on screen
2. In the Device Settings menu, select Disconnect for the active Sensor. See Figure 4-6.
3. Select the Sensor name for the Sensor user wants to activate. See Figure 4-6.
Disconnect
Sensor Name
Figure 4-6: Switching between Sensors

Disconnecting the Sensor

1. Select the Bluetooth Icon on screen
2. In the Device Settings menu, select Disconnect for the active Sensor. See Figure 4-6.
3. Turn the Sensor off by holding the Power Button for two seconds until an
audible sounds is heard and power button is no longer flashing green.
Chapter 4 - Introduction to BITS Software Navigation 21