Main Menu - Wittke STARLIGHT Maintenance Manual

142 Multiplexing
Figure 9-5 Example of possible cause
N : If the system detects a problem, a beep will sound and a message will appear on the monitor
OTE
screen.
N : To go back to the Main Page or Main Menu, press "Esc" as needed until the desired page is
OTE
displayed.

Main Menu

To access the Main Menu, press the far left button when the Main Page is displayed.
When the Main Menu is displayed, you can have access to the following sections:
 I/O Status
 Password (optional)
 Program Version
 Pump Usage (optional)
 Time Adjust (available according to chassis)
Displayed in the lower center of the screen is an indicator that monitors traffic on the network. This
indicator is called Network Load, and it shows values that reflect such traffic.
N : The higher the network load value is, the heavier the traffic is on the network.
OTE
To exit this page and return to the Main Page, press "Esc". To choose a section from the Main Menu,
highlight the desired section using the up/down arrows and press the "OK" button.
I/O Status
In this section, you will find helpful information to troubleshoot body-related problems that you may
face during your day-to-day tasks. These problems can be of any nature, from hydraulic to
mechanical, electrical or pneumatic.
Select the control module corresponding to the part of the truck that needs to be checked.
For example, if you want to check all functions that are found in the cab, choose module #10. For all
functions that pertain to the chassis, choose module #50, etc.