Centralized Grease Block - Wittke STARLIGHT Maintenance Manual

Figure 3-1 Lube chart

Centralized Grease Block

Pins at the packer blade end of the cylinders are remotely greased via two grease fittings on the curb
side back of the packer blade (see Figure 3-2). Pins at the front header end of the cylinders should be
greased manually (standard) [see Figure 3-3] or via a remote greasing system located on the hopper
access door (optional) [see Figure 3-4].
Figure 3-2 Standard grease fittings on back of packer blade
Lubrication 33