Replacing Packer Cylinders - Wittke STARLIGHT Maintenance Manual

Be extra careful when conducting this step.
You may use straps to secure the packer.
Warning!
Make sure that the packer is properly secured before pulling it out of the body and always
use an appropriate lifting device. Failure to do so may result in damage, severe injury or
even death.
N : The packer weighs approximately 1900 lbs (without the cylinders).
OTE
Figure 8-5 Packer at rear end of body

Replacing Packer Cylinders

Warning!
Use an appropriate lifting device to remove cylinders.
To replace the packer cylinders:
1. Start the engine and engage the hydraulic pump.
2. Extend the packer until it reaches the end of the packing stroke (with tailgate closed).
3. Stop the engine and turn OFF the hydraulic pump.
Packer Maintenance 133