Turn On Your Mini-Pro - RGBlink mini pro User Manual

Note： The IP address of the mini-pro must be in the same LAN segment as the computer. Refer to 5.1 for IP
address manually changing IP address.

2.7 Turn on Your mini-pro

After mini-pro is connected to power supply, push the Power button on the rear panel,the
device will enter to the boot interface and enter operation interface within 10S.
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
14