Front Panel - RGBlink mini pro User Manual

Front Panel

1 Up/Down
S
2
2" Touch
3
Screen
4 M(menu)
5-Direction
5
Joystick
①②③④
6
7 T-Bar
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
1. Adjust volume of PGM when it is under Main menu
2. Proportionally adjust size of sub-picture when it is under position and
scale adjustment
3. Zoom in/out when PTZ control is enabled
Shortcut button, push it and touch screen enter quick operation interface
which includes 4 Preset to load, Audio,Record on/off,Mute on/off,Chroma
Key on/off
1. Operate mini-pro menu by tapping it and monitor 4 inputs in real time
2. Monitor the screen of the currently controlled camera in real time
under PTZ control, and save the currently set screen by tapping it, and a
call button can be formed on the screen
Main menu button, push it and touch screen back to main menu interface
and push it again touch screen display 4 inputs
1. left-right-up- down 4 directions to choose icons on menu and middle to
confirm entering next level
2. Move the sub-picture when it is under position adjustment
3. Control left right up and down movement when PTZ control is enabled.
4 inputs,
red: on air (PGM)
static green: signal is standing by
flashing green: ready to be switched
No light: input source is not supported or no input source
Manual switch, push to left end or right end to switch signal to PGM. T-Bar
is not at end position input switch will fail
8