Ptz Camera Setting - RGBlink mini pro User Manual

PTZ Camera Setting

When controlling the PTZ camera, the computer, mini -pro and PTZ camera should be in the same
network segment.
1
1
1. Set the corresponding communication port
on the PTZ camera, such as VISCA or UDP port
1259.
3
3. After IP address setting,turn on "Enable" and
you can control PTZ camera.
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
2
2
2. Set both old IP and new IP to the camera IP address you
want to control,the corresponding communication port to
1259 on mini-pro, configuration path: M(Menu) → FX →
PTZ Camera Setting Port on the control software of
mini-pro.
35