Ugm - Universal Graphics Module; Ugm Dvi-I Connector A&B (J209, J210) - Kontron ETXexpress UGM User Manual

6.11

UGM - Universal Graphics Module

The Kontron ETXexpress UGM Baseboard is the first evaluation baseboard using an Universal Graphics
Module directly on the backplane without a riser card and providing all UGM interfaces and functions.
Note: UGM is based on PCIexpress Graphics. Only COMexpress modules with PEG are compatible to UGM
6.11.1 UGM DVI-I Connector A&B (J209, J210)
According to the UGM Specification a Universal Graphics Module supports 2 TMDS connections. Use DVI-I
Connector A (J209) connected to TMDS-A as default DVI connector. Depending on the graphics core a
secondary DVI-I connection (J210, connected to TMDS-B) is available.
Both DVI connectors are fully equipped DVI-I connectors with a digital and analog part. The standard
UGM CRT output (VGA-A) is connected to J209 and can be used with a standard DVItoVGA adapter. The
analog part on J210 (VGA-B) is shared with the TV-out.
DVI A & B Pin out
Pin DVI A (J209)
1 TMDS-A DATA2-
2 TMDS-A DATA2+
3 GND-A (Shield 2/4)
4 n.c.
5 n.c.
6 DDC_CLK
7 DDC_DAT
8 VGA-A VSYNC
9 TMDS-A DATA1-
10 TMDS-A DATA1+
11 GND-A (Shield 1/3)
12 n.c.
13 n.c.
14 +5V
15 GND-A
Kontron User's Guide ETXexpress UGM
Evaluation Board
DVI B (J210) Pin
TMDS-B DATA2- 16
TMDS-B DATA2+ 17
GND-B (Shield 2/4) 18
n.c. 19
n.c. 20
DDC_CLK 21
DDC_DAT 22
VGA-B VSYNC 23
TMDS-B DATA1- 24
TMDS-B DATA1+ C1
GND-B (Shield 1/3) C2
n.c. C3
n.c. C4
+5V C51
GND-B C52
26
6 Connector and feature description
DVI A (J209)
TMDS-A Hot plug detect TMDS-B Hot plug detect
TMDS-A DATA0-
TMDS-A DATA0+
GND-A (Shield 0/5)
n.c.
n.c.
GND-A (CLK Shield)
TMDS-A CLK+
TMDS-A CLK-
VGA-A Red
VGA-A Green
VGA-A Blue
VGA-A HSYNC
GND-A
GND-A
DVI B (J210)
TMDS-B DATA0-
TMDS-B DATA0+
GND-B (Shield 0/5)
n.c.
n.c.
GND-B (CLK Shield)
TMDS-B CLK+
TMDS-B CLK-
VGA-B Red
VGA-B Green
VGA-B Blue
VGA-B HSYNC
GND-B
GND-B