Ugm Tv-Out (J8, J212, J221, J222, J223, J227, J228) - Kontron ETXexpress UGM User Manual

6.11.3 UGM TV-Out (J8, J212, J221, J222, J223, J227, J228)

The ETXexpress UGM Baseboard provides three possible TV-Out connections. Composite Video (Yellow
Cinch) and S-Video out are available on rear panel connector J212. Component TV-Out is available via
pin header J8.
The UGM TV-Out is shared with VGA-B on DVI-B (Connector J210). To enable TV-Out on S-Video and
Composite Video connector J212 jumper J221-J223 must be closed. J227 and J228 are for HSync and
VSync on component video connector J8.
TV-Out / VGA-B Configuration Jumper
Jumper
J221 (Lum)
J222 (Chrom)
J223 (FBAS)
J227 (VSync)
J228 (HSync)
TV-Out connector Pin out
Pin
1
2
3
4
5
6
7
8
Note: Use GND_TV_FBAS on component TV-Out with HSync and VSync
Kontron User's Guide ETXexpress UGM
Evaluation Board
Open
VGA-B active on J210
Composite J212
FBAS
GND
-
-
-
-
-
-
28
6 Connector and feature description
S-Video and Composite active on J212
Component active on J8
S-Video J212
GND_Y Pb (HDTV_Chroma-B)
GND_C
Luminanz_Y
Chrominanz_C
- Pr (HDTV_Chroma-R)
-
-
-
Closed
Component J8
GND_TV_FBAS
Y (HDTV_Lum)
GND_Lum
GND_Chrom
HSYNC
VSYNC