Table of Contents
Advertisement
Energetic XL
4.
Installation
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
If trussing systems are used, installation must be carried out only by instructed or skilled persons.
●
Make sure that the device is rigidly mounted to prevent movement due to vibration or jarring.
●
Follow all applicable European, national and local safety regulations concerning rigging and
trussing.
The device should be installed in such a way that there is at least 3 m distance in height and 2,5 m
laterally between the laser beam that exceeds the spectator MPE and the surface where spectators are
expected to stand.
If the laser display or show is not under the continuous control of an operator who can immediately
terminate laser radiation in the event of a problem, the MPE shall not exceed 5 times the spectator MPE
in the space between 3 m and 6 m above the surface where spectators are expected to stand.
Product code: 43169
14
Fig. 07
Fig. 08
Advertisement
Table of Contents
