Table of Contents
Advertisement
Energetic XL
6.
Operation
The device can be operated with a DMX controller or manually.
Manual operation can be done using:
●
the control panel
●
the keyboard, or
●
the remote control.
Safety Instructions for Operation
WARNING
Laser radiation
Avoid exposure to beam.
This device is a class 3B laser device according to the classification in NEN-EN-IEC 60825-1:2014. The
device can be operated only by instructed or skilled persons.
●
Check all applicable national and international regulations concerning laser safety before operating
this device.
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a laser projector to produce laser displays or show effects. It
is suitable only for indoor installation. This device is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Energetic XL supports the following control modes:
●
Stand-alone:
●
Master/Slave:
●
DMX-512:
Product code: 43169
Auto mode (built-in shows), sound-controlled mode (built-in shows), manual
mode
Auto mode (built-in shows), sound-controlled mode (built-in shows), manual
mode
2 and 9 channels
21
Advertisement
Table of Contents
