Table of Contents
Advertisement
Energetic XL
1.
Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
●
Showtec Energetic XL
●
IEC power cable (1,5 m)
●
2 keys for the interlock
●
2 keys for key switch
●
Remote control plug
●
IR remote control
●
User manual
Intended Use
This device is intended for professional use as a laser projector to produce laser displays or show effects. It
is suitable only for indoor installation. This device is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Product Lifespan
This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when the device is not in operation. This will reduce the wear and will improve the device's
lifespan.
Text Conventions
Throughout the user manual the following text conventions are used:
●
Buttons:
●
References:
●
0–255:
●
Notes:
Product code: 43169
All buttons are in bold lettering, for example "Press the UP/DOWN buttons"
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "turn the adjustment screw (02)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
4
Fig. 01
Advertisement
Table of Contents
