J7 - Hardware Reset Connector; J8 - On Board Pci Ide 1 Hdd Connector; J9 - On Board Pci Ide 0 Hdd Connector - DTK PAM-0035S User Manual

Mainboard Installation

3.4.7 J7 - HARDWARE RESET CONNECTOR

Attach the Hardware Reset Switch cable to this connector. The Hardware Reset
restarts the system.

3.4.8 J8 - ON BOARD PCI IDE 1 HDD CONNECTOR

J8 is a 40-pin IDE Hard Disk connector. It is assigned as Channel 1 for
Secondary Hard Disk Controller connector.

3.4.9 J9 - ON BOARD PCI IDE 0 HDD CONNECTOR

J9 is a 40-pin IDE Hard Disk connector. It is assigned as Channel 0 for Primary
Hard Disk Controller connector.
Table 20
25