Jp22, Jp23 - Parallel Port Setting And Ecp Dma Selection; Memory Installation - DTK PAM-0035S User Manual

P54c pci mainboard

Table of Contents

2.13 JP22, JP23 - PARALLEL PORT SETTING AND

ECP DMA SELECTION

JP22, JP23 are for Parallel Port Setting and ECP DMA selection. Refer to Fig 2

for the location.

The mainboard lets user add system memory via SIMM sockets on the mainboard.

On-board memory is located in two banks: Bank 0 - SIM1 & SIM2, and Bank 1 -

SIM3 & SIM4. DRAM Configuration "Table-Free"

is supported on this board. See Fig 2.

User can install either 1/2/4/8/16/32/64MB SIMM (72-pin) in each SIMM

socket. Note that all SIMM modules in a bank must be the same capacity.

SIMM speed required for best performance depends on the CPU speed, which

requires 70ns SIMM.

JP22, JP23 -- Parallel Port Setting

Table 12

Chapter 2

Table of Contents

Quin-35