3.5
J6 - HDD LED
J6 is usually connected to a HDD LED on front of the system case. If the HDD is in
operation, the indicator lights during operation.
3.6
J7 - IrDA CONNECTOR
J7 is a IrDA connector that use UART2 as interface of IrDA Infrared and ASKIR.
3.7
J9, J10 – PRIMARY/SECONDARY IDE
CONNECTORS
These connectors support the provided IDE hard disk ribbon cable.
connecting the single end to the board, connect the two plugs on the other end to
your hard disk or other device.
3.8
J11 – CD-ROM AUDIO CONNECTOR (SONY)
Fig. 7 HDD LED
Fig. 8 IrDA Connector
Fig. 9 CD-ROM Audio
Connector Configuration
After
13