Connection The Mainboard; Connection Locations - DTK PAM-0035S User Manual

Mainboard Installation
3.3

CONNECTION THE MAINBOARD

Once the mainboard has been fastened into the system case, the next step is to
connect the internal cables. The internal cables are wire leads with plastic female
connectors that attach to the connectors. A description of each connector and its
connector pins follows. See Fig 7 for the location of the connectors on the
mainboard.
Note: Before making connectors on the board, make sure that power to the
system is turned off.

3.3.1 CONNECTION LOCATIONS

Fig 7 Connectors Layout
21