Table of Contents
Advertisement
Hardware Configuration
2.14.1 INSTALLING SIMM
Install a SIMM in a memory socket as follows:
Caution:
1.
2.
3.
4.
Static electricity can seriously damage SIMM
modules.
Review the section on static electricity precautions at the
beginning of this manual.
Align the SIMM module so that the pin-1 marking on the
module corresponds to the socket pin-1 marking.
Hold the module at a 70-degree angle to the socket, and insert
the module's connectors into the socket.
Snap the module to a vertical position in the socket. The
module is fully inserted when retaining pegs snap into holes at
each end of the module.
Fig 6 Installing a SIMM
17
Advertisement
Table of Contents
