Table of Contents
Advertisement
67
TRIAL MODE - Click here for more information
9
■ Navigation
The transceiver assists you to navigate to a selected destination.
The function works only when the transceiver is receiving valid GPS signals.
The function cannot work while in the MOB mode.
NOTE: The Navigation function is a supplemental aid to navigation only, and is not
intended to be a substitute for primary navigation equipment.
D Starting navigation
There are 3 ways of setting a destination using
selecting in the Waypoint list.
NOTE: A popup screen is displayed when the vessel arrives at or near the destination.
To stop the function, push any key.
When the Audible Alarm function is set to "ON," an alarm also sounds. (p. 60)
Using [NAV]:
1.
Push
NAV
on the operating screen.
• The "Waypoint" screen is displayed.
2.
waypoint.
3.
Push
to start navigation.
Start
• The plotter screen is displayed, and the transceiver
starts to navigate.
•
is displayed on the plotter screen.
4.
Push the Software Key for your next operation.
Navigating to a waypoint:
See "Navigating to a waypoint" on page 64 for details.
NAV
- Quick Links:
- Connecting to the IC-M510
- Connections
Hide quick links:
Advertisement
Table of Contents
