Icom IC-M510 Instruction Manual page 42

29
TRIAL MODE - Click here for more information
7
DIGITAL SELECTIVE CALLING (DSC)
D Sending a Test call
channels. When you cannot avoid testing on a Distress or safety channel, you should
indicate that these are test calls.
involved.
Other DSC
1. Push .
• The "Compose Non-Distress" screen is displayed.
You can also display the "Compose Non-Distress"
screen by selecting the "Other DSC" item on the Menu
screen.
2. Select "Test," and then push [ENT] or [CH/ENT].
• The Test call is selected, and returns to the "Compose
Non-Distress" screen.
3. Select "Address," and then push [ENT] or [CH/ENT].
• The "Address" screen is displayed.
4. Select a station to send the Test call to.
You can also select "Manual Input" to manually enter
the calling station.
5. Push Call to send the Test call.
If Channel 70 is busy, the transceiver stands by until
the channel becomes clear.
6.
• An alarm sounds.
• The screen to the right is displayed.
7. Push Alarm OFF to turn OFF the alarm.
•
8. Push Close Window .
• The received call's information is displayed.
• The call is saved in the DSC Log.
STBY
9. Push to return to the operating screen.
• "Terminate the procedure. Are you sure?" is
displayed.
10. Push to return to the operating screen.
OK
•