Aquaquake Water Draining Function; Editing A Channel Name - Icom IC-M510 Instruction Manual

TRIAL MODE - Click here for more information

■ AquaQuake Water Draining function

AquaQuake Water Draining function removes water from the speaker grill by vibrating the
speaker cone.
CAUTION: DO NOT use the AquaQuake Water Draining function when an external
speaker is connected.
1.
2. Hold down AquaQuake to turn ON the function.
• A low frequency vibration beep sounds to drain the
water, regardless of the volume level setting.
This function is activated for a maximum of 10
seconds, even if you continue to hold down
AquaQuake .
3. Release the key to turn OFF the function.

■ Editing a channel name

You can edit the name of each operating channel and weather channel, using numbers,
uppercase letters, symbols, and a space. This enables easy recognition of the channels
or stations. All VHF marine channels are set with default names.
1.
2.
You cannot edit a channel name during Dualwatch, Tri-watch, or a scan.
3. Push .
CH Name
• The "Channel Name" screen is displayed.
4. Edit the channel name.
Finish
5. Select
save the edited name and return to the operating
screen.
TIP:
• Select to enter numbers and letters, and
•
•
•
the entered character.
BASIC OPERATIONS
AquaQuake
.
CH Name
.
to enter symbols.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
14