Icom IC-M510 Instruction Manual page 97

TRIAL MODE - Click here for more information
• Radio
[MENU] > Settings > Radio
Scan Type
Selects the scan type. The default setting
version.
See page 16 for details.
Normal Scan: Scans all Favorite channels in
the selected channel group.
Priority Scan: Sequentially scans all
periodically checking
Scan Timer
You can use the Scan Timer to pause, or to
detected.
ON: When a signal is detected on a
channel, the scan pauses for 5
the signal disappears in less than
5 seconds, the scan immediately
resumes.
OFF: When a signal is detected on a
channel, the scan pauses until
the signal disappears, and then
resumes.
Dual/Tri-watch
See page 18 for details.
another channel.
channel.
Channel Group
Select the suitable channel group for your
depending on the transceiver version.
See page 10 for details.
Call Channel
transceiver version.
See page 13 for details.
WX Alert
For the
See page 11 for details.
The preset Weather channels
scanning.
ON: The previously selected (last used)
scanning.
detected.
Voice Scrambler
unit is installed.
Function
or OFF.
Codes
understand each other, all transceivers
in your group must use the same
scrambler unit.
Favorite CH
You can set all channels as Favorite
channels, clear all settings, or reset to
default. By default, some channels are
depending on the transceiver version.
See page 17 for details.
Favorite channels.
channels.
channels to the default.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
84