Table of Contents
Advertisement
11
OTHER FUNCTIONS
■ Navigation
The transceiver assists you to navigate to a selected destination from your current position.
You can select a AIS target during navigation.
L The function cannot work while in the MOB mode.
NOTE: IC-M94D/IC-M94DE's Navigation function is a supplemental aid to navigation
only, and is not intended to be a substitute for primary Navigation equipment.
D Starting navigation
There are 3 ways of setting a destination, using
selecting in the Waypoint list.
NOTE: A popup screen is displayed when the vessel arrives at or near the destination.
To stop the function, push any key.
L When the Audible Alarm function is set to "ON," an alarm also sounds. (p. 60)
Using
:
1.
Push
• The "Waypoint" screen is displayed.
2.
Push [▲] or [▼] to select a waypoint.
L Push
3.
Push
• The plotter screen is displayed, and the transceiver starts to
.
navigate
•
is displayed on the plotter screen.
4.
Push the Software Key below for your next operation.
:
(DSC)
:
(Stop)
:
(MOB)
:
(Range)
:
▲
(Target
)
:
▼
(Target
)
:
(Detail)
:
(List)
59
on the operating screen.
to sort the waypoints by Name or Range.
or [ENT] to start navigation.
Displays the "Compose Other" screen to send
an Individual call. (p. 28)
L Displayed only when a target is selected.
Stops navigation. (p. 60)
Starts the MOB mode. (p. 58)
L The transceiver automatically exits the
Navigation mode.
Selects the display range. (p. 46)
Selects the farthest target from your vessel.
Selects the closest target to your vessel.
Displays the details on the selected target.
(p. 50)
L Displayed only when the target is selected.
L Push
to return the plotter screen.
Selects the list screen that you want to
display. (p. 47)
, selecting on the AIS screen, and
Advertisement
Table of Contents
