Icom IC-M510 Instruction Manual page 83

TRIAL MODE - Click here for more information
D Navigation settings
Navigation settings can be customized in "Navigation" on the Menu screen.
[MENU] > Settings > Navigation
Track
Display
You can select whether or not to display
the vessel track on the plotter display.
The vessel track is recorded, regardless
of this setting.
ON: The vessel track is displayed.
OFF: The vessel track is not displayed.
Record
You can select whether or not to save
the vessel track.
ON: The vessel track is saved.
OFF: The vessel track is not saved.
Clear track
You can delete the vessel track.
When "Clear track. Are you sure?" is
OK
displayed, push to delete the
vessel track.
Record Reference
You can select the setting to record the
vessel track.
Distance: The vessel track is recorded
Time: The vessel track is recorded
Interval (Distance)
Set the distance to record the vessel track
to between 0.01 and 6.00 NM (in 0.01 NM
steps), when you select "Distance" in the
Record reference.
Interval (Time)
Set the period of time to record the
vessel track to between 1 and
60 seconds (in 1 second steps) when you
select "Time" in the Record reference.
Anchor watch
Audible Alarm
You can select whether or not to sound
an Arrival alarm when the vessel arrives
at or near the destination.
ON: The alarm sounds.
OFF: The alarm does not sound.
Range
Set the range to between 0.01 and
6.00 NM (in 0.01 NM steps) for the
alarm function.
Arrival Alarm
Audible Alarm
Select whether or not to sound an arrival
alarm.
ON: The alarm sounds when the
vessel arrives at or near the
destination.
OFF: The alarm does not sound.
Range
Set the range to sound an alarm when
your vessel arrives at or near the
destination to between 0.01 and 6.00 NM
(in 0.01 NM steps).
XTE alarm
Audible Alarm
Select whether or not to sound an XTE
Alarm.
ON: The alarm sounds when the
OFF: The alarm does not sound.
Range
Set the range to sound an alarm when
0.01 and 6.00 NM (in 0.01 NM steps).
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
70