Basic Operations; Selecting A Channel - Icom IC-M510 Instruction Manual

TRIAL MODE - Click here for more information

■ Selecting a channel

D Regular Channel
D Channel 16
Channel 16 is the distress and safety channel. It is used to establish the initial contact
with a station, and for emergency communications. Channel 16 is monitored during both
Dualwatch and Tri-watch. While in the standby mode, you must monitor Channel 16.
CH/WX , and then push the software key
below CH/WX .
D Call channel
Each Channel Group has separate leisure-use Call
channels. The Call channel is scanned during Tri-watch.
The Call channels can be selected and used to store your
most often used channels in each Channel Group, for
quick recall. See page 13 for details on setting the Call
channel.
channel.
• The Call channel number and "CALL" are displayed.
push the software key below CH/WX .
D Selecting a Channel Group
Channel Groups are preset into your transceiver. You can select a Channel Group for
USA, International, and Canadian, depending on the transceiver version.
1. Open the "Channel Group" screen.
2.
3.
4. The selected Channel Group's icon is displayed on the operating screen.

BASIC OPERATIONS

Channel Group
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
CH/WX , and then
15
16
17
18
10